Cobalt Digital COMPASS 9085 Loudness Processor - Manual (Page 70)

3
9085 Function Submenu List and Descriptions
3-32 9085 PRODUCT MANUAL 9085-OM (V4.3)
Timecode
Provides timecode data extraction from various
sources, and provides formatting and re-insertion
controls for inserting the timecode into the output video.
Table 3-2 9085 Function Submenu List — continued
SDI VITC
Detect/Extract
SDI ATC_LTC
Detect/Extract
SDI ATC_VITC
Detect/Extract
Priority/
Select
525i SDI
w/ VITC
Waveform
SDI VITC
Timecode
Proc/Embed
ATC_VITC
Timecode
Proc/Embed
ATC_LTC
Timecode
Proc/Embed
525i SDI
w/ATC_VITC
Insert
Control
Line
Number
Control
Buffer/
Format
ATC_VITC Insertion = Enabled; line 13
A
A
B
Audio LTC
Detect/Extract
9085
525i 5994
w/ VITC
Waveform
525i 5994
w/ ATC_VITC
Noting that the incoming video contains VITC
waveform timecode data (as shown in the status
display), set the Source Priority drop-down lists to
include VITC Waveform timecode data (SDI VITC) as
a choice. This extracts VITC Waveform timecode
data from the incoming video. A
Shown below is an example in which received SDI video with SDI VITC waveform timecode is to be converted to SDI
ATC_VITC timecode data. Each Timecode control is fully described on the pages that follow.
In this example, it is desired to provide SDI
ATC_VITC timecode data in the SDI output video. As
such, set SD ATC Insertion to Enabled. B