Cobalt Digital COMPASS 9085 Loudness Processor - Manual (Page 5)

9085-OM (V4.3) 9085 PRODUCT MANUAL 1-1
Chapter 1
Chapter 1
Introduction
Overview
This manual provides installation and operating instructions for the 9085
HD/SD Loudness Processor with Audio-Video Delay Correction card (also
referred to herein as the “9085”).
Note: This manual covers the three models of the 9085 card, which vary only in the
loudness processor channel capacity as follows:
• 9085-LP51 – 5.1-Channel Loudness Processor
• 9085-2LP20 – Dual Stereo Loudness Processor
• 9085-LP20 – Single Stereo Loudness Processor
Where applicable, descriptions related exclusively to specific models are
denoted by (9085-LP51 only), (9085-2LP20 only), or (9085-LP20 only). In all
other aspects, the cards function identically as described in this manual.
This manual consists of the following chapters:
• Chapter 1, “Introduction” – Provides information about this manual
and what is covered. Also provides general information regarding the
9085.
• Chapter 2, “Installation and Setup” – Provides instructions for
installing the 9085 in a frame, and optionally installing 9085 Rear I/O
Modules.
• Chapter 3, “Operating Instructions” – Provides overviews of
operating controls and instructions for using the 9085.
This chapter contains the following information:
• 9085 Card Software Versions and this Manual (p. 1-2)
• Manual Conventions (p. 1-3)
• Safety Summary (p. 1-4)
• 9085 Functional Description (p. 1-5)
• Technical Specifications (p. 1-18)
• Warranty and Service Information (p. 1-21)
• Contact Cobalt Digital Inc. (p. 1-22)