Troubleshooting, Error and failure indicator overview, Troubleshooting -28 – Cobalt Digital OBSIDIAN 3G 9502-DCDA-3G Downconverter User Manual
Page 54: Error and failure indicator overview -28, Troubleshooting (p. 3-28)
3
Troubleshooting
3-28
9502-DCDA PRODUCT MANUAL
9502DCDA-OM (V1.3)
Troubleshooting
This section provides general troubleshooting information and specific
symptom/corrective action for the 9502-DCDA card and its remote control
interface. The 9502-DCDA card requires no periodic maintenance in its
normal operation; if any error indication (as described in this section) occurs,
use this section to correct the condition.
Error and Failure Indicator Overview
The 9502-DCDA card itself and its remote control systems all (to varying
degrees) provide error and failure indications. Depending on how the
9502-DCDA card is being used (i.e, standalone or network controlled through
DashBoard™ or a Remote Control Panel), check all available indications in
the event of an error or failure condition.
The various 9502-DCDA card and remote control error and failure indicators
are individually described below.
Note:
The descriptions below provide general information for the various status and
error indicators. For specific failures, also use the appropriate subsection
listed below.
• Basic Troubleshooting Checks (p. 3-32)