Daystar KJ09137BK - Manual (Page 3)

5
Installation Instructions
1. Jack up the front of the vehicle and support the vehicle at the frame with
jack stands. Put wheel chocks behind the rear tires and set park brake.
2. With the jack under the front axle, jack up the axle to remove the driver
side and the passenger side wheels then disconnect the shock and sway bar
end link on the driver side then the passenger side.
Shock
Sway bar link
6
3.
Disconnect the ABS (Anti Lock Brake) line from the bracket (located on the
Steering knuckle) first driver side then passenger side.
4. With the shocks, sway bar link and ABS (Anti Lock Brake) line
Discon-
nected lower
the axel down to
remove the coil
springs on the
Driver
side first then
the pas- senger
side.
Shock
Brake line
Brake line