beautypg.com

Standard assembly without bearings (continued) – Grain Systems Custom, Utility and Bulk Tank Augers PNEG-1445 User Manual

Page 21

background image

4. Assembly

PNEG-1445 6", 8", 10" and 12" Custom Augers

21

Standard Assembly without Bearings (Continued)

3. Slide the extension tube over the extension flight, making sure the tube is pressed securely against

the main auger tube.

(See Figure 4N.)

Figure 4N

4. Slide the extension connecting band over the two (2) sections of tube, making sure the connecting

band is centered over the mated surfaces of the tubes. Tighten the connecting band down using
the correct hex bolts and nylock nuts.

(See Chart below

and

Figure 4O.)

Figure 4O

Connecting Band Bolts

6" and 8"

5/16"-18 x 1" Hex Bolt

10" and 12"

3/8"-16 x 1" Hex Bolt

(

See Chart above

for bolt sizes.)

See also other documents in the category Grain Systems Equipment: