Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1295 - Manual (Page 42)

42 PNEG-1295 16" - 36" Platform
9. 6 X 6 DISTRIBUTOR PLATFORM
Handrails
Locate the toe board cover plate (DSP36001) and bolt over the unused notched toe board area.
Attach handrail posts to the toe boards as shown using the 5/16" hardware provided. (Leave
hardware loose until all handrails are in place). Attach all handrail angles and brace angle.
(See Figure 9F). After all pieces have been attached go back and tighten all hardware.
See Chart below for part numbers and lengths of all handrails.
Figure 9E
Model Size
Handrail DSP36009 - 51.1/2"
Handrail DSP36010 - 74.7/8"
Handrail DSP36011 - 74"
Post DSP36012 - 43.1/2"
Brace DSP36013 - 37.3/4"