beautypg.com

Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-751-G2 User Manual

Page 41

background image

5. Assembly

PNEG-751-G2 12" Series II Sweep 131' and 135' Diameter

41

G. Loosely bolt the bottom belt guard to the motor mount using four (4) 3/8"-16 x 1" hex bolts, flat

washers and lock washers.

(See Figure 5Y.)

Figure 5Y

H. Slide the top belt guard over the bottom belt guard as shown in

Figure 5Y

and tighten bolts.

I. Install belt guard bottom back plate.

J. Slide belt guard bottom pan and bolt into place.