beautypg.com

Channel extension kit – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-751-G2 User Manual

Page 36

background image

5. Assembly

36

PNEG-751-G2 12" Series II Sweep 131' and 135' Diameter

Channel Extension Kit

A. 131' and 135' Sweeps need an extension kit installed.

B. Attach the center weight weldments to the adjustable center weight channel using eight (8)

1/2" x 1-1/4" bolts, split lock washers and hex nuts. The adjustable center weight has three (3) sets
of holes for the center weight weldments to adjust the weights.

(See Figure 5S.)

Figure 5S

C. Place assembly on top of the back tail section, around the tires. The end of the adjustable center

weight should be placed under the tail frame.

(See Figure 5T.)

Figure 5T

D. Fasten assembly to tail section using two (2) 3/8" x 2-7/16" U-bolts, four (4) 3/8" lock washers and

four (4) 3/8" hex nuts.

See also other documents in the category Grain Systems Equipment: