Grain Systems PNEG-1743 - Manual (Page 9)

PNEG-1743 Vision for Tower Dryers 9
2. Decals
Contact the local power company to have a representative survey the installation to assure the wiring is
compatible with their system and adequate power is supplied to the unit. Safety decals should be read and
understood by all people in the grain handling area. Inspect all decals and replace any that are
illegible, worn or missing. Contact your dealer or the factory to order replacement decals.
If a decal is damaged or is missing, contact:
GSI Decals
1004 E. Illinois St.
Assumption, IL. 62510
Phone: 1-217-226-4421
A free replacement will be sent to you.
NOTE: Decals are not shown actual size.
HIGH VOLTAGE.
Will cause serious
injury or death.
Lockout power
before servicing.
DC-1224
Decal: DC-889
Decal DC-889 has two locations. One inside the
fan/heater control box and another on the dryer upper
control box door next to the main power disconnect.
Decal: DC-1224
Decal DC-1224 is located in two places on the fan/heater control box. One on the
lid and one on the front of the fan heater control box. Another location for this
decal is inside the upper control box for the dryer.