Grain Systems PNEG-1743 - Manual (Page 23)

5. Operations
PNEG-1743 Vision for Tower Dryers 23
Setup Button
The Setup screen will allow you to configure other parameters of the dryer. To access the “Select
Hardware Setup Parameter to Modify” screen, also known as the “Setup Screen”, touch the
button. (See Figure 5F.)
Figure 5F
The following list can be modified:
1. Drying Mode: The button will display the “Drying Mode Selection” window.
Select continuous flow. A check mark is displayed next to the currently selected drying mode.
(See Figure 5G.)
Figure 5G