Grain Systems PNEG-1458 - Manual (Page 39)

8. Dryer Operation
PNEG-1458 T-Series Tower Dryer 39
Figure 8B
Setting the Temperatures
Setting the temperature set points for the dryer is a simple procedure. To adjust the temperature
set points touch the
button at the bottom of Operation screen. A new screen will appear called the
Select Temperature Set Point to Modify screen. (See Figure 8C.) As you can see you modify the set point
for the plenum by touching the Plenum 1 Temperature button.
The plenum temperature set point range is 80°F-250°F and the current temperature set point for each
plenum is displayed next to the corresponding Plenum button.
Figure 8C