Grain Systems PNEG-1458 - Manual (Page 27)

6. Vision Touch Screen Display
PNEG-1458 T-Series Tower Dryer 27
Figure 6D
The plenum temperature set point range is 80°F-250°F and the current temperature set point for each
plenum is displayed next to the corresponding Plenum button.
The grain temperature set point range is 80°F-150°F and the current temperature set point for the grain
temperature is displayed next to the Grain Temperature button.
Modifying a temperature set point is much like setting a timer described on Page 25 . Touch the desired
button of the set point you wish to change. The Modify Temperature Set Point screen will appear. Enter
the desired temperature using the displayed number pad then touch the Accept button. Touching the Exit
button at the bottom of the Select Temperature Set Point to Modify screen will return you to the
Operators screen.