Grain Systems PNEG-1458 - Manual (Page 28)

6. Vision Touch Screen Display
28 PNEG-1458 T-Series Tower Dryer
The Setup Screen
The Setup screen will allow you to setup other parameters of the dryer. To use the Setup screen touch the
button. The Select Hardware Setup Parameter to Modify screen will now be displayed. As you can
see there several different parameters that can be modified on this screen:
Figure 6E
1. Drying mode: Touching the Drying Mode button will display the Select Drying Mode window.
Continuous flow will be the only option for Tower Dryers.
2. M/C Setup: The M/C Setup operations are described in greater detail in the dryer operation section
on Page 37 of this manual.
3. Unload parameters: Touching the Unload Parameters button will present a screen where you will
edit you maximum and minimum unload rates.
Figure 6F