Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1366 - Manual (Page 21)

5. Assembly
PNEG-1366 12" and 16" Series II Sweep Quick Disconnect Control Box Kit 21
Based on where the outlet for the drop cord is installed on the panel, all three (3) mounting positions may
not be possible.
(See Figure 5D.)
Figure 5D
A sample installation configuration is shown in Figure 5E for the auger drive power outlet, tractor drive
power outlet, overload for motor control outlet and the drop cord outlet. Figure 5E shows preliminary
dimensions for all the necessary holes that need to be cut into the panel. Actual sizes may vary.
Figure 5E