Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1366 - Manual (Page 15)

PNEG-1366 12" and 16" Series II Sweep Quick Disconnect Control Box Kit 15
4. Introduction
General Information
1. GSI reserves the right to improve its product whenever possible and practical to do so. We reserve
the right to change, improve and modify products at any time without obligation to make changes,
improvements and modifications on equipment sold previously.
2. This bin sweep auger has been engineered and manufactured to give years of dependable service.
The care and maintenance of this equipment will affect the satisfaction and service obtained. By
following the instructions and suggestions recommended, the owner should receive quality service
for many years. If additional information or assistance should be required, please contact GSI.
3. It is important to check both the quantity of parts and their descriptions with the packing list enclosed
within each package. All claims for freight damage or shortage must be made by the consignee within
ten (10) days from the date of the occurrence of freight damage. The consignee should accept the
shipment after noting the damage or loss.
NEVER enter a grain bin unless ALL power driven equipment has been shut down.
Disconnect and lock out power before entering the bin or servicing the equipment.