beautypg.com

Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1597 User Manual

Page 17

background image

4. Assembly

PNEG-1597 Sweep Tractor and Control Panel Assembly Instructions

17

14. Mount the gearbox plate and motor assembly to the 5/8"-11 x 6" threaded rod installed to the tractor

frame using four (4) 5/8"-11 hex nuts.

15. Attach the weight stand to the weight plate and tractor frame with four (4) 1/2"-13 x 1-1/4" flange bolts

and serrated flange nuts.

(See Figure 4H.)

Figure 4H

See also other documents in the category Grain Systems Equipment: