beautypg.com

Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1597 User Manual

Page 13

background image

4. Assembly

PNEG-1597 Sweep Tractor and Control Panel Assembly Instructions

13

7. Assemble the tire and wheel assemblies securely to the wheel hubs using five (5) 1/2" flat washers

and lock nuts.

NOTE: Remove the screws or nails that are present in the tires to contain the foam in the tires when

they are made. The treads of the tires should be in the forward direction.

Figure 4C

shows

the proper orientation of the tire and wheel assemblies.

8. Assemble the strut bracket to the tractor frame using four (4) 3/8"-16 x 1" flange bolts and serrated

flange nuts.

(See Figure 4C.)

Figure 4C

See also other documents in the category Grain Systems Equipment: