beautypg.com

Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1597 User Manual

Page 16

background image

4. Assembly

16

PNEG-1597 Sweep Tractor and Control Panel Assembly Instructions

13. Mount the drive assembly to the gearbox plate using four (4) 3/8"-16 x 1" flange bolts. Place the

gearbox plate and motor assembly over the threaded rods, resting on the hex nuts.

(See Figure 4G.)

Figure 4G

See also other documents in the category Grain Systems Equipment: