beautypg.com

Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1597 User Manual

Page 14

background image

4. Assembly

14

PNEG-1597 Sweep Tractor and Control Panel Assembly Instructions

9. Bolt the shield bracket to the front of the tractor frame using two (2) 3/8"-16 x 3-1/2" hex head

cap screws, two (2) flat washers (only on the bottom slot of the bracket) and hex nuts.

10. Attach the weight plate to the tractor frame using two (2) 3/8"-16 x 1" flange bolts and serrated

flange nuts.

(See Figure 4D.)

Figure 4D

See also other documents in the category Grain Systems Equipment: