Chapter 6: stiffeners – Grain Systems Tanks PNEG-4105A User Manual
Page 68
Close-Punch Laminated Base Stiffener (2 Ga) with Insert
(2+14 to 2+10 Ga) to a Base Boot
Reference the following information when connecting a close-punch laminated base stiffener
(CTS-2114XX) to a base boot (CTS-2109XX or CTS-2110XX).
Figure 6-26 Close-Punch Laminated Base Stiffener to a Base Boot
A
Close-punch laminated base stiffener (CTS-
2114XX)
B
Close-punch base Insert (CTS-2113XX)
C
Close-punch base boot (CTS-2109XX or CTS-
2110XX)
D
3/8 x 1 Bolt (S-7485)
E
3/8 Nut (S-9426)
F
Completed assembly
NOTE: Two-post stiffeners shown. The bolt pattern will
vary for three-post. Only place bolts where holes in
the stiffeners align with holes in the sidewall sheet.
Close-Punch Standard Stiffener to a 12–Bolt Pattern Laminated
Stiffener with Insert
Reference the following information for a close-punch connection of a standard stiffener (CTS-2073) to a
12–bolt pattern laminated stiffener (CTS-2137XX) with insert (CTS-2138XX).
Figure 6-27 Close-Punch Standard Stiffener to a 12–Bolt Pattern Laminated Stiffener with Insert
A
Close punch standard stiffener (CTS-2073XX)
B
Close-punch laminated stiffener (CTS-2137XX)
C
Close-punch insert (CTS-2138XX)
D
3/8 x 1 Bolt (S-7485)
E
3/8 Nut (S-9426)
F
Completed assembly
NOTE: Two-post stiffeners shown. The bolt pattern will
vary for three-post. Only place bolts where holes in
the stiffeners align with holes in the sidewall sheet.
68
Pneg-4105A 105 Ft Diameter 40-Series Bin