Grain Systems Tanks PNEG-4105A - Manual (Page 31)

Chapter 3: Hardware Requirements
Bolt S-10165
An S–10165 is a 3/8 x 2 in. JS bolt that is pre-assembled with a sealing washer.
Bolt (S-10165) is used in the following locations:
• Use in bins that are 105 ft in diameter, 28 rings and taller and in
135 ft diameter bins.
• Use in overlapping seams for 8 gauge to 9 gauge quad lami-
nated sidewall sheets.
• Use to connect 6 gauge quad laminated sheets to one another.
• Use to attach stiffeners to 6 gauge quad laminated sidewall
sheets.
• The color of the bucket lid is light blue.
A 2.350 in. (5.97 cm) C Grade 8
B 2.000 in. (5.08 cm) D Grade 8.2
Bolt S-10262
An S–10262 is a 7/16 x 1 1/2 in. JS bolt that is pre-assembled with a sealing washer.
Bolt (S-10262) is used in the following locations:
• Use in bins that are 105 ft in diameter, 27 rings and smaller.
• Use in vertical seam connections in 9 gauge laminate and
thicker.
• Lid color of bucket is white.
A 1.895 in. (4.81 cm) C Grade 8
B 1.500 in. (3.81 cm) D Grade 8.2
Bolt S-9389
An S–9389 is a 7/16 x 2 in. JS bolt that is with a pre-assembled sealing washer.
Bolt (S-9389) is used in the following locations:
• Use in horizontal seams of laminated sidewall sheets that are six
gauge and have a figurate pattern.
NOTE: The standard 0.4375 in. hex nut (S-9281) will be used in
conjunction with this bolt.
• The color of the bucket lid is light purple.
A 2.395 in. (6.08 cm) C Grade 8
B 2.000 in. (5.08 cm) D Grade 8.2
Pneg-4105A 105 Ft Diameter 40-Series Bin 31