Grain Systems Tanks PNEG-4105A - Manual (Page 54)

Chapter 6: Stiffeners
Stiffeners Splice
Use the following information to determine the gauge of the splice needed to connect the stiffeners.
Figure 6-4 Stiffener splice
Call Out Part Number Description Length Available Gauges
A CTS–2091XX Stiffener splice 10 in. (25.4 cm) 8, 10, 12, 14
Use the following chart to determine the gauge of the splice, which is determined by the gauge of the stiff-
eners that are being connected. If connecting a heavier gauge to a lighter gauge stiffener, always use the
heavier gauge splice for the 13 to 12, 8 to 6, and 2 to 0 gauge connections.
For example: If connecting a 13 gauge stiffener to a 12 gauge stiffener, use the 12 gauge splice. If con-
necting an 8 gauge stiffener to a 6 gauge stiffener, use the 10 gauge splice. If connecting a 2 gauge stiff-
ener to a 0 gauge stiffener, use the 8 gauge splice.
Table 6-3 Splice Usage
Stiffener Gauge
Splice Gauge
8 Gauge 10 Gauge 12 Gauge 14 Gauge
18 X
17 X
16 X
15 X
14 X
13 X
12 X
11 X
10 X
9 X
8 X
6 X
5 X
2 X
0 X
54 Pneg-4105A 105 Ft Diameter 40-Series Bin