Grain Systems Tanks PNEG-4105A - Manual (Page 165)

Chapter 8: Accessories
Figure 8-23 Horizontal line location of discharge chute
D Vertical center line F Center of discharge chute location
E Sidewall horizontal seam G Horizontal center line
6. Measure approximately 7 in. (17.78 cm) on each side of the vertical center line (D), and place a mark
or scribe.
7. Measure approximately 8-1/2 in. (21.59 cm) on each side of the horizontal center line (G), and place
a mark or scribe.
8. Using these marks, create an outline of the discharge chute hole to be cut.
9. Field cut the discharge chute hole making a 1-1/2 radius at each corner.
Pneg-4105A 105 Ft Diameter 40-Series Bin 165