Grain Systems Bin Accessories PNEG-1802 - Manual (Page 39)

4. Inside Ladder Installation
PNEG-1802 Inside Ladder Instructions 39
2.66" Corrugated Commercial Hopper Tank 10-22 Rings
Inside Ladder Placement
The inside ladder package includes the ladder, starter brackets and double the amount of standoff
brackets. Position the ladder directly under the manhole roof panel as shown in
Figure 4AI and install the
starter brackets as shown in Figure 4AJ on Page 40 . Place the standoff brackets vertically on the sidewall
sheets every 16" using the horizontal seam holes for every other hole location. Use 5/16" x 3/4" bin bolts
to attach the standoff brackets to the sidewall of the grain bin.
Figure 4AI