Rough Country 740.20 - Manual (Page 4)

Post Installation
1. Check all fasteners for proper torque. Check to ensure there is adequate clearance between all rotating, mobile,
fixed and heated members. Check steering for interference and proper working order. Test brake system.
2. Perform steering sweep. The distance between the tire sidewall and the brake hose must be checked closely. Cycle
the steering from full turn to full turn to check for clearance. Failure to perform inspections may result in component
failure.
3. Re torque all fasteners after 500 miles. Visually inspect components and retorque fasteners during routine vehicle
service.
4. Readjust headlights to proper settings.
5. Have a qualified alignment center realign the front end , to the factory specifications.
6. Be sure to safely modify the exhaust.
KIT CONTENTS
Thank you for choosing Rough Country for all your suspension needs.
Optional replacement strut part #G53477 available. Call your local dealer for more information.