Rough Country 1132 - Manual

JEEP JK REAR COIL CLAMP KIT
Thank you for choosing Rough Country for your suspension needs.
In addition to these instructions, professional knowledge of disassemble/reassembly procedures as well as post installa-
tion checks must be known. Attempts to install this system without this knowledge and expertise may jeopardize the
integrity and/or operating safety of the vehicle.
PRODUCT USE INFORMATION
This kit is used to clamp the rear coil to the axle to ensure the coil spring stays seated in the lower mount un-
der heavy articulation.
Rough Country makes no claims regarding lifting devices and excludes any and all implied claims. We will not be re-
sponsible for any product that is altered.
If question exist we will be happy to answer any questions concerning the design, function, and correct use of our prod-
ucts by calling 1-800-222-7023.
NOTICE TO DEALER AND VEHICLE OWNER
These instructions should be kept in the vehicle for its service.
92113200
Tools Needed:
3/4” Socket & Wrench
Thank you for choosing Rough Country for your suspension needs.
Kit Contents:
Retainer (2)
Flag Nut (2)
Poly Bag (1)
1-Poly Bag Containing:
1/2” x 1 1/2 Bolts (2)
1/2” Flat Washer (2)
1/2” Flat Washer (2)