Rough Country 52580-35 - Manual (Page 4)

Header Bikini ® – Installation Instructions
Rev. C 0109 52580 pg. 4
Care and Maintenance of your Bestop
Product
Your Bestop product is made of the fi nest materials available. To
keep it looking new and for the maximum possible wear, it will
need periodic cleaning and maintenance.
Washing: The fabric should be washed often using soap,
warm water and a soft bristle brush. Rinse with clear water to
remove all traces of soap or use Bestop-recommended Bestop
Cleaner and Bestop Protectant. Bestop Cleaner and Bestop
Protectant are specially formulated to provide a total cleaning
and protection system. Bestop Cleaner will not harm vehicle
fi nish, is biodegradable and environmentally friendly. Bestop
Protectant protects against UV-fading, cracking and hardening.
Water: Seeping through at the seams may be stopped by
applying 3-M Scotchgard® on the inside of the seams. Rips
in the fabric may be repaired with Bondex® iron on patches.
Iron the patches to the Inside of the top, carefully following the
Bondex® instructions.
LIMITED WARRANTY
We warrant our product to be free from defects in material and workmanship, for the terms specifi ed below, provided there has been normal use and proper maintenance.
This warranty applies to the original purchaser only. All remedies under this warranty are limited to the repair or replacement of any item or items found by the factory to be
defective within the time period specifi ed. If you have a warranty claim, fi rst you must call our factory at the number below for instructions. You must retain proof of purchase
and submit a copy with any items returned for warranty work. Upon completion of warranty work, if any, we will return the repaired or replaced item or items to you freight
prepaid. Damage to our products caused by accidents, fi re, vandalism, negligence, misinstallation, misuse, Acts of God, or by defective parts not manufactured by us, is not
covered under this warranty.
THE WARRANTY TIME PERIOD IS AS FOLLOWS FOR REPLACE-A-TOP™, SAILCLOTH REPLACE-A-TOP™, SUPERTOP®, SUPERTOP® REPLACEMENT SKINS,
SUNRIDER®, AND TIGERTOP®: TWO YEARS FROM DATE OF PURCHASE.
THE WARRANTY TIME PERIOD IS AS FOLLOWS FOR ALL OTHER “SOFT GOODS” MANUFACTURED BY OUR COMPANY (USING PRIMARILY VINYLS, PLASTICS, AND/
OR FOAM): ONE YEAR FROM DATE OF PURCHASE.
THE WARRANTY TIME PERIOD IS AS FOLLOWS FOR ALL OTHER “HARD GOODS” MANUFACTURED BY OUR COMPANY (USING PRIMARILY METALS, PLASTICS,
AND/OR FIBERGLASS): ONE YEAR FROM DATE OF PURCHASE.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE LIMITED IN DURATION TO THE SAME
DURATION AND SCOPE AS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you. This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state.
For further information or request for warranty work, please contact:
Bestop Inc. Customer Service
Toll-Free: (800)845-3567
Main: (303)465-1755
E-mail: [email protected]
Website: www.Bestop.com
Locate the buckle straps sewn to the rear corners of
the Bikini . Wrap the strap under the Bikini and around
the sport bars. Thread the end of the strap through the
buckle and pull it tight. Repeat on the other side.
Secure Rear Corner Straps
Wrap Strap around
Horizontal Sport Bar
and Thread Through
Buckle