Rough Country 52580-35 - Manual (Page 2)

Header Bikini ® – Installation Instructions
Rev. C 0109 52580 pg. 2
Parts List
Bikini Qty - 1
Drape the Bikini over the speaker pod. Locate the
two straps sewn to the rear of the bikini. Pull the
straps under the pod and hook each strap into the
opening as shown. Pull the end of each strap to
tighten securely.
Secure Center Strap
View from Rear
Bikini
Bikini
Hook Strap into Hole
Pull End of Strap
to Tighten
Slide the pocket sewn along the front of the Bikini
over the edge of the header and snap it to the
snaps.
Snap Bikini to Header
Snap Fabric
to Header
Center the Bikini on the vehicle. Place the tabs on
the Header Knob Bases above the footman loops
in the windshield frame. Place a Header Knob
Plate under a footman loop. Install a Header Knob
through the plate and footman loop and thread it
into the Header Knob Base. Repeat this with both
Header Knob Bases.
Secure Header to Windshield
Footman
Loop
Header
Knob Plate
Header
Knob Base
Header
Header
Knob