Rough Country RC714 User Manual
Page 9
5. Using a torx 15 to remove lower bumper screws from the plastic bumper cover.
See Photo 6.
6. Using a 7mm socket remove the screws from the inside of bumper.
See Photo 7.
7. Using a screwdriver remove the metal clips from the plastic bumper cover. There will be five metal clips to be re-
moved.
See Photo 8.
8. Using a pair of pliers to release the plastic clips holding the bumper cover to metal part of the bumper, while pulling
on the bumper cover to separate. Only remove enough to allow removal of bumper mounting bracket.
See Photo 9.
9. Using a 45 torx remove the five bolts holding the bumper mounting bracket.
See Photo 10.
10. Remove the threaded body clip from the stock bumper brackets and place clips in the same area on the new sup-
plied bumper brackets.
See Photo 11.
PHOTO 8
PHOTO 7
PHOTO 9
PHOTO 6
PHOTO 11
PHOTO 10
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 324S (20 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)