Rough Country RC714 - Manual

2014 GM 4WD 1500 P/U 1 1/4” Body Lift
Thank you for choosing Rough Country for all your suspension needs.
Rough Country recommends a certified technician install this kit. Attempts to install this kit without this knowledge and
expertise may jeopardize the integrity and/or operating safety of the vehicle.
Please read instructions before beginning
installation. Check the kit hardware against the kit contents list page. Be sure you have all needed parts and know
where they go. Review tools needed list and make sure you have the tools needed to install the kit.
PRODUCT USE INFORMATION
We will not be responsible for any product that is altered. We will be happy to answer any questions concerning the de-
sign, function, and use of our products by calling 800-222-7023.
Kit was designed for use with both standard cab and 4 door models. Standard cabs will not utilize all cab mount
spacers. Standard cabs only will use the cab strap extension brackets.
This body lift was developed using a 33x12.5x20 tire with factory wheels. Combo kits are available. Ask your
Rough Country Dealer for more info
.
NOTICE TO DEALER AND VEHICLE OWNER
Any vehicle equipped with any Rough Country product should have a “Warning to Driver” decal installed on the inside of
the windshield or on the vehicle ’s dash. The decal should act as a constant reminder of the vehicles unique handling
characteristics. These instructions should be kept in the vehicle for its service life.
92RC71400
Kit Contents:
1-Fr Bumper Driver Relocation Bracket
1-Fr Bumper Passenger Relocation Bracket
1-E-brake Bracket
1-Rear Bumper Shim
1-Rr Bumper Driver Relocation Bracket
1-Rr Bumper Passenger Relocation Bracket
6-1 1/4” 2014 GM Cab Spacers
2-1 1/4” X 3” Body Pucks
10-1 1/4” X 2” Body Pucks
2-Standard Cab Strap Ext.
RC714BAG2 Containing:
12—3/8” x 2.25” Bolt
12—3/8” Washers
12—3/8” Nylocks
1—1/2” x 1” Bolt
3—1/2” Washers
1—1/2” Nylock
2—10mm x 30mm Button Head Bolts
2—3/8” USS Washers
4—12mm Flange Lock
2—12mm x 35mm Bolt
RC714BAG3 Containing:
8—12mm x 65mm Bolts
8—1/2” Washers
2—14mm x 140mm Bolts
Tools Needed:
Jack
Jack Stands
Wood Blocks (2x4)
Pliers
Hammer
Phillips Screwdriver
Drill Motor
1/2” Drill Bit
Reciprocating Saw
8mm Socket
10mm Socket / Wrench
11mm Socket / Wrench
12mm Socket / Wrench
13mm Socket / Wrench
14mm Socket / Wrench
15mm Socket / Wrench
16mm Socket / Wrench
18mm Socket / Wrench
19mm Socket / Wrench
21mm Socket / Wrench
22mm Socket / Wrench
Hand Grinder
#15, #40, & #45 Torx bit