Rough Country 1063 - Manual

97– 06 TJ FRONT TRACK BAR BRACKET
INSTALLATION INSTRUCTIONS
1. Remove the track rod from the frame using a 18mm wrench.
2. Install the track rod bracket as shown in the stock track rod mount and secure in the mount using the sup-
plied 1/2” lock nut. Make sure the bracket is flat against the frame. Snug but do not fully tighten at this time.
Photo 1.
3. Using the bracket as a guide, mark and drill the two side holes through the inner and outer frame as shown
in Photo 2 using a 17/32” drill bit. Make sure to keep the drill level when drilling.
92106300
Thank you for choosing Rough Country for your Jeep off road needs.
Please read all the instructions before beginning the installation.
PRODUCT USE INFORMATION
We will be happy to answer any questions regarding our products by calling us @ 800-222-7023. Rough Country
will not be responsible for any product that is altered. This kit designed for use with a 4” kit. Use with any
other kit WILL require an adjustable track rod. This kit will not work on a non lifted vehicle.
KIT CONTENTS
1-TRACK ROD BRACKET
1-POLY BAG CONTAINING
2-1/2” X 3 1/2” BOLT
3-1/2” NUT
5-1/2 WASHER
2-SLEEVES
TOOLS NEEDED
17/32 DRILL BIT
29/32” DRILL BIT
DRILL MOTOR
18MM SOCKET
19MM SOCKET
PHOTO 1 PHOTO 2
PLEASE NOTE A EXTENDED PITMAN ARM IS RECOMMENDED WHEN INSTALLING THIS KIT TO
ENSURE THE VEHICLE DOES NOT DEVELOP BUMPSTEER. PART #6605 IS AVAILABLE FROM YOUR
ROUGH COUNTRY DEALER. PLEASE CALL 1-800-222-7023 FOR DETAILS
PLACE BRACKET ON FRAME AND ON MOUNT DRILL FRAME USING A 17/32” DRILL BIT