Rough Country 289 - Manual (Page 3)

1. Chock the front tires and jack up the rear of the vehicle. Support the vehicle with jack stands.
2. Remove the tires and wheels using a 19mm socket.
3. Position a floor jack under the rear axle and apply light pressure.
4. Remove the shocks from the lower mount using a 18mm wrench /socket. Retain the lower shock hardware for reuse.
5. Lower the axle and remove the coil springs from the coil seat.
6. Install the supplied 3/4” spacer on top of the coil spring and reinstall on the vehicle. See Photo 1 & 2.
7. Jack up the floor jack to keep the coil springs in position.
8. Reinstall the shock absorbers on the lower mount using the stock hardware. Tighten using a 18mm wrench / socket.
9. Reinstall the tires and wheels using a 19mm socket.
10. Jack up the vehicle and remove the jack stands.
11. Lower the vehicle to the ground.
REAR INSTALLATION INSTRUCTIONS
Photo 1 Photo 2