Rough Country RC701 User Manual
Page 9
5. Loosen the six bed bolts using 18mm socket but only remove one side at a time. See Photo 6, 7 & 8.
6. With jack stand or hydraulic jack and wood block raise passenger side slowly. See Photo 9. Raise bed up enough
to install body pucks.
7. Install 4 pucks per side and add lock tight on the supplied
12mmx 65mm bolts / washers and install. Torque to 65 ft/
lbs. NOTE:Make sure fuel filler tube is un-obstructed dur-
ing lift of driver side. See Photo 10, 11 & 12.
PHOTO 6
PHOTO 7
PHOTO 8
PHOTO 9
PHOTO 10
REMOVE THE BED HARDWARE
REMOVE BED BOLTS
REMOVE BED BOLTS
RAISE BED
INSTALL BED PUCKS
PHOTO 11
PHOTO 12
INSTALL BED PUCKS
INSTALL BED PUCKS
See also other documents in the category Rough Country For the car:
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 324S (20 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)