Rough Country RC701 - Manual (Page 7)

38. Install tow hooks so that they are upside down and install stock bolts. Tighten to 65ft-lbs using a 18mm wrench /
socket. See Photo 31.
39. Install new front bumper brackets using stock hardware. Adjust bracket up as high as it will go and tighten using
21mm socket / wrench. See Photo 32.
40. Install new lower bumper bracket on driver and passenger with supplied 3/8” x 1” bolts, washers and lock nuts. See
Photo 33. Do not tighten at this time.
41. Install front bumper using stock hardware. Adjust bumper so that it is straight on truck. Tighten hardware with 21mm
socket / wrench. See Photo 34.
42. Install lower bumper brackets using stock bolts. Tighten using a 15mm socket / wrench for stock bolts and 14mm for
new bolts. See Photo 35.
43. Reinstall rubber shroud with stock clips and then install grill using 10mm for stock bolts.
44. Reinstall radiator bezel with the stock 8 clips.
PHOTO 30 PHOTO 32
PHOTO 33 PHOTO 34
INSTALL BUMPER RELOCATION BRACKET
INSTALL LOWER BUMPER BRACKET REINSTALL BUMPER BOLTS
REINSTALL LOWER BUMPER BOLTS
PHOTO 31
REINSTALL TOW HOOKS
PHOTO 35