Rough Country 779 User Manual
Page 2
3. Use a jack to raise the muffler skid into place. Reinstall the two factory bolts on the bumper bracket and tighten with
a 16mm wrench. See Photo 3.
4. Use a pair of vise grips to clamp the front of the muffler skid to the frame cross member. Use the muffler skid as a
drill guide and drill the four 13/32” holes. See Photo 4.
5. Slide the flag nuts on top of the frame cross member and install the supplied 3/8” bolts, washers, and lock washers.
See Photo 5.
6. Tighten the four 3/8” bolts with a 9/16” socket. See Photo 6.
PHOTO 3
PHOTO 4
PHOTO 5
PHOTO 6
Thank you for purchasing a Rough Country muffler skid plate.
See also other documents in the category Rough Country For the car:
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 324S (20 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)