Rough Country 779 - Manual

JEEP JK MUFFLER SKID
Thank you for choosing Rough Country for your suspension needs.
Rough Country recommends a certified technician install this system. In addition to these instructions, professional
knowledge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to install
this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle.
Please read instructions before beginning installation. Check the kit hardware against the parts list. Be sure you have all
needed parts and know where they go. Also please review tools needed list and make sure you have needed tools.
PRODUCT USE INFORMATION
Rough Country makes no claims regarding lifting devices and excludes any and all implied claims. We will not be re-
sponsible for any product that is altered.
If question exist we will be happy to answer any questions concerning the design, function, and correct use of our prod-
ucts by calling 1-800-222-7023.
This JK muffler skid is designed to work with any JK with stock with stock exhaust.
Kit Picture
Tools Needed
9/16” Socket
16mm Socket
Vise Grips
13/32” drill bit
Install Instructions
1. Remove the 2 inside bumper bracket bolts with a 16mm wrench. See Photo 1.
2. Locate the vent tube hose for the rear diff and pull the clip loose from the frame cross member. Relocate the clip to
the front side of the cross member. This way it clears the new muffler skid. See Photo 2.
92779000
Photo 1 Photo 2 PHOTO 2 PHOTO 1