Rough Country 577.20 - Manual (Page 13)

12. Remove the stock rear brake line bracket from the frame using a 10mm wrench. See Photo 10. Install the new
brake line bracket on the drivers side frame rail in the stock mount with factory hardware and install the stock brake
line bracket to the new bracket with the supplied 5/16” x 3/4” bolt/washers & nut. Remove the stock diff hose from
the stock mount and install into the new bracket. See Photo 11.
13. Install the wheels and tires.
14. Jack up the vehicle and remove the jack stands. Lower the vehicle to the ground with floor jack.
PHOTO 10 PHOTO 11
Remove the stock brake line bracket Install the brake line bracket and diff hose