Rough Country 561.20 - Manual (Page 4)

ALSO AVAILIBLE FROM ROUGH COUNTRY
87491 DUAL STEERING STABILIZER
Front Shock Absorbers (2)
Rear Shock Absorbers (2)
Front Track Bar Bracket & Cam Plate
Front Spring Spacers (2)
Rear 2” Lift Blocks & U-bolts
POST INSTALLATION INSTRUCTIONS
1. Check all fasteners for proper torque. Check to ensure there is adequate clearance between all rotating, mobile,
fixed and heated members. Check steering gear for interference and proper working order. Test brake system
2. Perform steering sweep. Check to ensure brake hoses have sufficient slack and will not contact rotating, mobile, or
fixed members, adjust lines/brackets to eliminate interference and maintain proper working order. Failure to perform
inspections may result in component failure
3. Readjust headlights to factory settings
4. Have vehicle aligned by a certified alignment professional.
5. All components must be retightened after 500 miles, and every three thousand miles after installation
Thank you for choosing Rough Country for your suspension needs.
Visit us on the web @www.roughcountry.com!!!
Front Radius Arm Brackets (2)
Kit Contents