Rough Country 1010 - Manual (Page 3)

7. Install the winch in the winch plate with the hardware included with the winch. See Photo 7.
8. Remove the plugs from the box and remove the top of the box. See Photo 8.
9. Remove the mounts from the box using a 3/8” wrench. See Photo 9.
10. Install the supplied 6mm x 15mm bolts in the box and secure the bracket to the box with the supplied 6mm nuts as
shown. Tighten using a 10mm wrench. See Photo 10.
11. Install the assembly to the radiator support as shown with the supplied 1/4” x 3/4” bolts and lock nuts and tighten
using a 11mm wrench. See Photo 11.
12. Install the roller fairlead and the fairlead bracket as shown in Photo 12 with the supplied 3/8” x 1 1/4” bolts and lock
nuts. Tighten using a 9/16” socket / wrench.
PHOTO 7 PHOTO 8
PHOTO 9 PHOTO 10
PHOTO 11 PHOTO 12
INSTALL WINCH ON PLATE REMOVE TOP COVER TO ACCESS BOLTS
REMOVE RETAINING CLIPS INSTALL BRACKET WITH 6MM X 15MM BOLTS
INSTALL BRACKET ON RADIATOR SUPPORT INSTALL FAIRLEAD AND COVER BRACKET