VANCO VPW-280709 (8X8) - Manual (Page 12)

www.vanco1.com
888.769.4156 12
6. Read Status Command
The command length is 4 bytes.
bc + ‘_’ + ‘-’
“bc” is the key word, ‘_’ is Space, ‘-’ is carriage return.
When you send the read status command to 280709, if succeeds, it will feedback the status of all outputs.
When you send “Bc” to 280709, if succeed, it will feedback the current status of 280709.
For example, if you send "bc " to 280709 and it is successful, it will feedback "s11\r\n" ,"s22\r\n","s33\r\n",
"s44\r\n","s55\r\n","s66\r\n","s77\r\n","s88\r\n". It means that the output 1 selects the input 1, the output
2 selects the input 2, output 3 selects the input3, output 4 selects the input 4, output 5 selects input 5, the
output 6 selects the input 6, the output 7 selects the input 7, the output 8 selects the input 8.
7. Web password reset
The command length is 4 bytes.
rpw+ ‘ ’
“rpw” is the key word , ‘ ’ is carriage return.
When you send the Web password reset command to MX0808, if succeed, it will feedback "rpw", and the web
password will be set as "0000000000".
LAN CONTROL
Note: Use the direct UTP cable to connect with PC, or use cross-over cable to connect to the Ethernet
switcher
A. When NETCTL is run on PC for the first time, it will create a file ‘NETCTL.TXT’. This file is for the device
information’s backup. This information includes the MAC address of 280709, IP address, device name etc.
Double click NETCTL.exe to run NETCTL. It will search the device. If the device is a new one, NETCTL will list
it‘s IP address. If IP address appears, please click the Read Device button.
NETCTL will change the IP address to device name.