Toner Cable HPF-54MHz 54 MHz High-Pass Filter - Manual

LPF-230 In-Line Low Pass Filters
• Removes channels for insertion of security or
other locally originated channels
• Passes channels below cutoff frequency
• Blocks higher channels allowing clean insertion
of channels
• Frequency range 5~230MHz (LPF-230),
5~450MHz (LPF-450), 5~550MHz
(LPF-550), 5~700MHz (LPF-700)
• Pass-band insertion Loss <0.5dB
• Stop-band rejection >-50dB, SMD high stability
• High EMI shielded tube case
• Nickel plated precision brass threads
• Custom design available
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Specifications
Bandwidth LPF-230 LPF-450 LPF-700
Band Pass (MHz) 5~230MHz 5~450MHz 5~700MHz
(CATV 2-24) (CATV 2-62) (CATV 2-108)
Band Stop (MHz) 300~1000MHz 530~1000MHz 800~1000MHz
(CATV 36-158) (CATV 75-158) (CATV 125-158)
Insertion Loss
Band Pass (dB)
<1.0 <1.0 <1.0
Band Stop (dB) >50 >50 >50
Passive Distribution Components
UVSJ UHF-VHF Band Separator-Combiner
• Separates and isolates VHF (54~216MHz) from
UHF high (470~809MHz) signals, providing for
clean insertion into headend strip amplifier
• Filters and mixes VHF and UHF signals, allowing
mixing of multiple antenna onto single cable
• Reduces harmonics and out of band interference for
improved amplifier performance
• Low insertion loss 0.5dB max
• Impedance 75Ω
• VHF-Band DC power passive for remote preamplifi-
er powering
• Machined F-connector threads
• Epoxy sealed back cover
• Yellow-chromate plated zinc diecast housing
Specifications
Bandwidth Rejection Insertion Loss Return Loss
Common 50~806MHz - - -
VHF 54~216MHz >30dB <0.5dB >15dB
UHF 470~806MHz >42dB <0.5dB >15dB
Ordering Information
In-Line Low Pass Filters
LPF-230 5-230 MHz
LPF-450 5-450 MHz
LPF-700 5-700 MHz
Ordering Information
UVSJ UHF-VHF Band
Separator-Combiner
TSEQ-2150 In-Line Slope Equalizer
• Slope equalizers compensate for long cable runs
digital or analog applications
• High performance SMD board circuitry provides
consistent performance
• Precision machined F-connector threads
ensures smooth connector interface Specifications
Insertion Loss 40MHz 1GHz 2.1GHz
TSEQ-2150-6 6dB 3.52dB 1.8dB
TSEQ-2150-9 9dB 4.5dB 1.8dB
TSEQ-2150-12 12dB 5.5dB 1.8dB
TSEQ-2150-16 16dB 7dB 1.8dB
Bandwidth 40~2150MHz
Impedance 75 Ω
DC Pass-Thru Current 500 mA max
Ordering Information
TSEQ-2150 Satellite IF Inline
Slope Equalizer
(Values: 6, 9, 12,
16dB)