beautypg.com

Docsis 1.0 cmts (cable modem terminating system), Specifications – Toner Cable C2000 CMTS User Manual

Page 2

background image

Specifications Subject To Change Without Notice

Rev 08-12

©Toner Cable Equipment, Inc.

969 Horsham Road

l

Horsham, Pennsylvania 19044 USA

l

Phone: 215-675-2053 Fax: 215-675-7543

l

[email protected]

Specifications

Physical

Form Factor

1U Pizza box

Height

1.75 in / 4.45 cm

Width

19 in / 48.3 cm

Depth

22 in (approx)

Weight -
Rack Mounting

Yes

Network & Interfaces

• Layer2 Bridge
• 2 Fast Ethernet Ports

RF Spectrum

Downstream Parameters

Support

• 1 Downstream Port
• Downstream modulation 256QAM and 64QAM
• Downstream per channel bit rate 38 Mbps and 27 Mbps
• Downstream IF signal: 44MHz at 32.5dbmV (+/- 2dbmV)
Upstream Parameters
• C1000/C1500/C2000 = 1/2/4 Upstream ports respectively
• Upstream Modulation 16QAM and QPSK (various symbol rates

supported)

• Upstream per channel bit rate 10 Mbps
• Upstream signal level: -11dbmV

UpConverter

• Internal Up-converter
• Programmable 88 to 860MHz
• Power 40 to 63dbmV

DOCSIS Support

• DOCSIS 1.0
• DOCSIS 1.1 software upgradeable
• Euro-DOCSIS support (to be added soon).
• Inter-operates with all DOCSIS modems

User Interface

• Web interface, CLI and SNMP
• Remote monitoring and configuration

Network Management &

• SNMPv1 and v3

Provisioning

• IETF MIBS
• DOCSIS 1.0 MIBs
• Tools to monitor RF levels of CM and CMTS
• Tools to display the MAC and IP address of CM and CPE’s.

CMTS Servers

• Servers: DHCP, TOD, TFTP, FTP, Telnet and Web Server
• Integrated with the CMTS in the same 1U box.

Network features & tools

• Support for Non-routable IP addresses for Cable Modems.
• Routable IP addresses for CPE’s.
• DHCP relay and tagging

Subscriber Provisioning (Optional)

• Subscriber Provisioning Manager: Service activation/de-activation and

IP address assignment/management.

• Optional feature

C1000 / C1500 / C2000

DOCSIS 1.0 CMTS (Cable Modem Terminating System)