Toner Cable DSP806 806 MHz Agile PLL SAW-Filtered Digital Analog Channel Processor User Manual
Dsp806, Hdtv agile channel processor

Features
•
ATSC (HDTV), QAM, and NTSC
compatibility for CATV and
terrestrial broadcast applications
provides maximum compatibility
for all signal processing
•
High 45dBmV output for optimum
carrier-to-noise performance
•
Microprocessor control enables digital push-button input
and output channel selection for ease of installation,
configuration, and servicing
•
In-band carrier-to-noise ratio >65dB ensures superior picture quality.
•
SAW filtered for superior adjacent channel performance enables drop-in channel
expansion
•
Non-volatile memory for input and output channel recall in the event of power failure
•
Front panel controls and test point enable easy setup and monitoring
•
Double heterodyne conversion provides over 60dB spurious output and channel rejection for interference-
free adjacent channel operation
•
Broadcast-quality specifications for unparalleled data translation
•
IF loop provides compatibility with CMTS, QAM modulators and IF scramblers
•
IRC and HRC input and output offset available for frequency settings in systems using offset channels
•
Auxiliary AC outlet for convenience
Specifications Subject To Change Without Notice
Rev 05-12
©Toner Cable Equipment, Inc.
DSP806
HDTV Agile Channel Processor
969 Horsham Road
l
Horsham, Pennsylvania 19044 USA
l
Phone: 215-675-2053 Fax: 215-675-7543
l
Input Bandwidth
54~806MHz
Input RF Level (analog)
10dBmV
Input AGC Range (analog)
0~25dBmV
Output Bandwidth
54~806MHz
RF Output (analog max)
55dBmV
RF Output (digital max)
40dBmV
Carrier to Noise (in-band)
>60dB
Carrier to Noise (out of band)
>68dB
Spurious Output
>65dB
Output Frequency Stability
±5kHz
RF Input Connection
75 Ω F-Female
RF Output Connection
75 Ω F-Female
Voltage Input
110~120VAC
Power Output Receptacle
Yes
Dimensions
19˝ (L) x 9˝ (D) x 1.75˝ (H)
Weight
7.9 lbs
Ordering Information
DSP806
HDTV Agile Channel Processor
Specifications
Front View
Rear View