Toner Cable SMP260 Encoder - Manual (Page 2)

Specifications Subject To Change Without Notice Rev 02-13 ©Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
SMP260
Encoder
Encoding
Video Encoding
MPEG-2 MP@ML;
(CBR & VBR) MPEG-2 MP@HL;
MPEG-4 AVC at MP@L3;
MPEG-4 AVC at HP@L4
CVBS input NTSC, PAL, PAL-M, PAL-N and
SECAM
SDI input SD SDI and HD SDI with embedded
audio
HDMI input compatible with HDCP and HDMI 1.1
Video Output Bit-rate MPEG-2 SD 2 Mbps ~ 15 Mbps
(CBR & VBR) H.264 SD 1 Mbps ~ 10 Mbps
H.264 HD 6 Mbps ~20 Mbps
Video Output Resolution
SD Resolution
PAL (720x576) and NTSC (720x480);
HD Resolution 1920x1080i, 1280x720p;
Aspect Ratio 4: 3 or 16:9
GOP Structure IBP, IBBP
Audio Formats MPEG-1 Layer II, AAC,
Dolby Digital AC-3 (Future Feature)
Re-multiplexing
PID
Re-mapping and Filtering
MPTS Output Synchronization
Routing Any Input to Any Output
Redundancy Input Service Redundancy &
IP Port Redundancy
IP & ASI Interface
IP
Interface
1 x 1000 Mbps per port
IP Encapsulation MPEG TS over UDP/RTP
MPEG TS MPTS and SPTS
I/O Processing Up to 12 Streams,
max at 72 Mbps per socket
Addressing Unicast and Multicast
Management IGMPv1, IGMPv2, IGMPv3
Forward Error Correction ProMPEG
ASI
Interface
4 BNC connectors (2 ASI inputs and
2 ASI outputs), 75Ω
MPEG Format 188/204Bytes per TS
I/O Processing 1 MPTS/SPTS per port,
up to 120 Mbps per port
Management
Interface
100Base-TX, RJ45
NMS Wellav Digital Service Manager
Support SNMP
Physical & Environment
Input Voltage
90 – 260 VAC
Power Consumption Approx 60 W
Rack Space 1 RU
Dimension (WxHxD) 19 x 1.75 x 17.3”
480 x 44 x 440mm
Operating Temperature 0 to 50°C
Storage Temperature -40 to 65°C
Relative Operating Humidity <95%
Order Information
SEN2AV
MPEG-2 AV encoder (6 programs)
SEN2SDI MPEG-2 SDI/AV encoder (6 programs)
SEN4SDIS H.264 SD SDI/AV encoder (6 programs)
SEN4SDIH H.264 HD SDI/AV encoder (6 programs)
SEN4HDMI H.264 HDMI encoder (6 programs)