Specifications common to all models – Toner Cable DA Series Distribution Amplifiers User Manual
Page 2
©Toner Cable Equipment, Inc.
Specifications Subject To Change Without Notice.
Telephone:
Nationwide:
Fax:
E-mail:
Internet:
Dr
ak
e D
A/D
AR Series Distribution Amplifir
es
215-675-2053
800-523-5947
215-675-7543
http://www.tonercable.com
DA Series Standalone Power Doubling Distribution Amplfier Specifications
DA7533
DA7543
DA8632
DA8642
U/M
Frequency Coverage (forward path):
49 to 750
49 to 750
49 to 860
49 to 860
MHz
Frequency Coverage (return path):
5 to 36
5 to 36
5 to 36
5 to 36
MHz
Gain (forward path):
33
43
32
42
dB
Active Return Path Gain (minimum):
20
20
20
20
dB
Return Path Input Attenuator (adjustable):
0 to 10
0 to 10
0 to 10
0 to 10
dB
Noise Figure (maximum):
7
6.5
7.5
7
dB
Return Loss, Input and Output:
14
14
12
12
dB
Input Level
(maximum without using fixed input attenuator)
: +20
+10
+18
+7
dBmV
Optimum Input Level Range:
+10 to +15
+0 to +5
+7 to +12
-3 to +2
dBmV
Forward Path Nonlinear Distortions
DA7533 / DA7543
(110 channel loading, +44 dBmV ouput per channel)
DA8632 / DA8642
(129 channel loading, +40 dBmV ouput per channel)
Composite Triple Beat:
-58
-58
-60
-60
dB
Composite Second Order:
-58
-58
-58
-58
dB
Cross-modulation:
-62
-62
-64
-64
dB
Power Requirement:
26 VAC from supplied transformer with six foot amplifier-to-transformer cable
Power Transformer:
Supplied transformer has 120 VAC/60 Hz ±10% input requirement at 35 W.
Output is 26.3 VAC with screw terminals for attaching power cable from amplifier.
Supplied 120 volt 3-wire line cord is six feet long.
Size:
10.25”L x 7.25”W x 2.75”D (26 x 18.4 x 7 cm)
Weight:
6 lbs, 12 oz (14.9 k), including AC adapter
DA Series Standalone Power Doubling Distribution Amplfier Specifications
DAR8642
DAR8633
DAR8618
DAR7542
DAR7533
U/M
Frequency Coverage (forward path):
54 to 860
54 to 860
54 to 860
54 to 750
54 to 750
MHz
Frequency Coverage (return path):
5 to 42
5 to 42
5 to 42
5 to 42
5 to 42
MHz
Gain:
42
33
18
42
33
dB
Noise Figure (maximum):
7
7.5
7.5
6.5
7
dB
Channel Loading:
129
129
129
110
110
channels
Output Level
(max per channel for specified distortion)
:
+40
+40
+40
+44
+44
dBmV
Input Level
(maximum without using fixed input attenuator)
: +7
+18
+22
+10
+20
dBmV
Optimum Input Level Range:
-3 to +2
+7 to +12
N/A
+0 to +5
+10 to +15
dBmV
Forward Path Nonlinear Distortions
Composite Triple Bear:
-60
-60
-61
-58
-58
dB
Composite Second Order:
-60
-60
-60
-58
-58
dB
Cross-modulation
-64
-64
-68
-60
-60
dB
Power Requirement
115 VAC, 60 Hz, 24 Watts (Model DAR8618 - 18 watts)
Size:
19” W x 7.5”L x 1.75”D (48.3 x 19.1 x 4.5 cm)
Weight:
6 lbs, 4 oz (2.9 kg)
Specifications common to all models
Forward Gain Adjustment (except DAR8618):
10 dB minimum
Slope Control Adjustment (54 MHz):
10 dB minimum
Input/Output Impedances:
75 ohms
Return Loss, Input and Output:
14 dB
Monitor Port Levels Input and Output:
-30 dB
Fixed Input Attenuator:
Plug-in (SXP type) available
Fixed Input Equalizer:
Plug-in (QSA type) available
Hum Modulation:
-70 dB
RF Shielding:
Leakage complies with FCC part 76
Operating Temperature:
-20° to 60°C