Toner Cable OTEA-CL LaserLite 1550nm Optical Amplifier - Manual (Page 2)

Specifications Subject To Change Without Notice Rev 05-11 ©Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Specifications
OTEA-CL Series
LaserLite: 1550nm Optical Amplifier
OPTICAL PARAMETERS:
Wavelength . . . . . . . . . . . . . . . . . . . . . .1540nm to 1560nm
Port-to-Port Variation . . . . . . . . . . . . . . .4 Outputs ±0.50dB
8-24 Outputs ±0.75dB
Noise Figure . . . . . . . . . . . . . . . . . . . . . .4.5 dB (typical); 5.0 dB (max) @ +6dBm Input
Analog CNR Degradation . . . . . . . . . . .1dB Typical
Composite Second Order (CSO) . . . . . .-75dBc
Composite Triple Beat (CTB) . . . . . . . . .-80dBc
Optical Input Range . . . . . . . . . . . . . . . .0dBm to +10dBm (+6dBm typical)
Per Port Optical Output Power *
+16dBm to +22dBm
* (per appropriate OTEA-CL-Series Model#)
ELECTRICAL, ENVIRONMENTAL & MECHANICAL PARAMETERS:
Dimensions . . . . . . . . . . . . . . . . . . . . . .483mm x 311mm x 44 / 88 mm (1RU / 2RU)
Operating Temperature Range . . . . . . . .-10°C to +50°C (+14°F to +122°F)
Storage Temperature Range . . . . . . . . .-40°C to +65°C (-40°F to +149°F)
Humidity Range . . . . . . . . . . . . . . . . . . .15% to 85% non-condensing
AC Input Range (Standard) . . . . . . . . . .85-265 VAC (@47-63 Hz)
DC Input Range (Optional) . . . . . . . . . .-36 to -60VDC
Power Consumption
55W (1RU Package),
70W (2RU Package) Typical
EDFA INTERFACES:
Optical Connectors . . . . . . . . . . . . . . . . .Shuttered SC/APC
RS232 Control Interface (DB-9)
Commands, report alarms,
set alarms limits & monitor functions
LED Indicators (Red/Yellow/Green) SUPPLY, PWR IN, PUMP, MODE,
EQUIP, PWR OUT, FANS
(See manual for detailed description)
Laser Enable/Disable . . . . . . . . . . . . . . .Key Switch (key not removable in the
“on” position)
Ordering Information:
Model Number Description
OTEA-CL-B-nyy-zz-pp EDFA; 1RU/2RU Booster, 4 to 24 outputs at +18dBm to +22dBm
Valid combinations are;
18x18dBm, 24x18dBm, 4x21dBm, 8x21dBm, 16x21dBm,
18x21dBm, 20x21dBm, 4x22dBm, 8x22dBm, & 16x22dBm
Where
n
Number of outputs (4, 8, 16, 20, 24)
yy Optical power per port (dBm)
zz Optical connector type; SA = Shuttered SC/APC
pp Power; AC = AC power (universal AC), DC = DC power (48V
DC
)