Toner Cable Medallion 6000 Series 1550 nm Externally Modulated Transmitter - Manual (Page 2)

PROPERTY REQUIREMENT COMMENTS
Wavelength 1555 ±5 nm Various options + ITU-grid available
Channel Plan Various - see specification tables Customer channel plans available
Optical Connector SC/APC Other styles available
Monitoring Interfaces 100 Base-T Ethernet (SNMP)
Rear Panel RS-232 Interface
VFD Screen Front Panel Controls
VFD (Vacuum Fluorescent Display)
Operating Temperature 0°C to 50°C
Storage Temperature -20°C to 70°
Power Consumption 65W max
Transportation Vibration GR-2853-CORE In shipping package
Transportation Shock GR-2853-CORE In shipping package
Operating Humidity 20% to 85% Non-condensing
Supply Range (VAC) 90 to 265 VAC, 50/60 Hz
(VDC) ± (36 - 72) VDC
Dimensions 19.0”W x 15.0”D x 1.72”H (width includes 19” front panel ears, depth
includes conectors, fans & front panel)
Input Power Range 17 ±1 dBmV/ch 80 NTSC channels Manual mode
15 ±1 dBmV/ch 110 NTSC channels Manual mode
18 ±1 dBmV/ch 60 PAL channels Manual mode
20 ±1 dBmV/ch 42 CENELEC channels Manual mode
16 ±1 dBmV/ch 89 PAL channels Manual mode
27 ±1 dBmV/ch SAT-IF channels Manual mode
Input Power Range 19 ±2 dBmV/ch 80 NTSC channels CW mode
17 ±2 dBmV/ch 110 NTSC channels CW mode
20 ±2 dBmV/ch 60 PAL channels CW mode
18 ±2 dBmV/ch 42 CENELEC channels CW mode
22 ±2 dBmV/ch 89 PAL channels CW mode
29 ±2 dBmV/ch SAT-IF channels CW mode
Front Panel RF Gain / OMI +2 / -4 from nominal setting CATV performance can vary slightly
Adjustment Range
CATV Frequency Range
45 MHz - 1003 MHz
CATV Flatness ±0.50 dB 45 MHz - 550 MHz
±0.75 dB 45 MHz - 1003 MHz
CATV Flatness - N-Type ±0.75 dB 45 MHz - 1003 MHz (N-Type)
CATV Input Impendance 75 Ω
CATV Input Return Loss 16 dB min 45 MHz - 1003 MHz
CATV Front Panel RF Tap -20 ±1 dB down from RF input
CATV Front Panel RF Tap Flatness ±1 dB 45 MHz - 1003 MHz
SAT-IF Frequency Range 950 - 2800 MHz
SAT-IF Flatness ±2 dB
SAT-IF Input Impedance 75 Ω
SAT-IF Input Return Loss 10 dB min 950 MHz - 2800 MHz
SAT-IF Front Panel RF Tap 7 ±2.5 dBmV/ch at 1% OMI/ch
SAT-IF Front Panel RF Tap Flatness ±1 dB 950 MHz - 2800 MHz
Specifications Subject To Change Without Notice Rev 10-11 ©Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
GENERAL & MECHANICAL SPECIFICATIONS
MEDALLION 6000 Series
1550 nm Externally Modulated Transmitter