Toner Cable UMH160R SD-HD Integrated Reciever Decoder - Manual

UMH160R
SD/HD Receiver/Decoder
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Ordering Information
Base Receiving, Descrambling, HD&SD decoding, 2 x ASI (1in 1out)
Base (BISS) Base + BISS
L Receiver, descrambling, SD decoding, 2 x ASI (1in 1out)
SDI Base+Dual SDI
IP Receiving, Descrambling, HD&SD decoding, 4 x ASI (2In 2Out), 2 x GbE, SDI
AD IP+ Multiplexing (Dual Tuner Receiving)
AD (BISS) AD+BISS w/o Multiplexing
AD (MS) AD+MIS, w/o Multiplexing
TC2 IP+Multiplexing+Transcoder to MPEG2 (4 SD programs)
TC4 IP+Multiplexing+Transcoder to MPEG4 (4 SD programs / 2 HD programs)
QAM AD+QAM/OFDM Modulator (4 for QAM and 2 for OFDM)
UMH160R SD/HD Receiver/Decoder
UMH160R is a powerful and cost-effective broadcast level decoder. It supports MPEG-2/H.264 SD/HD signal
receiving through various inputs, and then decrypts and converts the processed programs/transport streams
through a rich set of outputs including CVBS, HDMI, SD/HD SDI, ASI, TS/IP and QAM/OFDM. It supports
multi-channel descrambling, multiplexing, external table/data insertion, transcoding and transmodulating. It
also supports video decoding and two audio channels. With remote web-based management interfaces, it is
ideal to support advanced content distribution, real-time signal conversion and transmission via an all IP
headend system.
Features
• Receive MPEG-2/H.264 signals from up to 2 transpon-
ders (DVB-S2) or 2 frequencies (DVB-C, DVB-T/T2 &
ISDB-T)
• 2 DVB common interfaces support multi-channel decryp-
tion, Embedded BISS-1 & BISS-E support TS & Program
level descrambling
• Support ASI input and TS/IP output redundancy 2 pairs
of audio decoding
• Programs re-multiplexing to meet various integration
needs
• Optional four-channel Annex A/B QAM output or two-
channel OFDM output, ideal for transmodulation
• Optional four-channel MPEG2 to/from H264 transcoding
(2 for HD programs)
• Configration and monitoring programs via NMS, Web
GUI or SNMP
• Support Cue Tone via GPIO
• Multi-stream demodulation & re-multiplexing (optional)