Toner Cable A860 Agile Modulator Integrated BTSC Stereo (option) - Manual

Features
• Re-broadcast quality performance specifications match those of fixed
channel modulators
• Integrated BTSC Stereo (optional)
• 60dBmV minimum output for optimum carrier-to-noise performance
• Precision SAW filter for superior adjacent channel performance enables
drop-in channel expansion
• State-of-the-art digital phase-locked loop (PLL) design guarantees
precise frequency locking for solid drift-free operation
• Superior design including automatic band-splitting filters for excellent carrier-to-noise ratio (>65dB)
• Bright LED bar graph provides simple modulation set-up
• Microprocessor tuning control provides digital display with push-button channel selection for ease of installation, configuration
and servicing
• Rear panel interfaces accept baseband video and three audio formats to provide maximum installation flexibility
• Composite and separate audio and video IF loops allow compatibility with encoders, ghost cancellers and video override appli-
cations
• MPX stereo loop provides encoded stereo input and compatibility with Emergency Alert equipment
• IRC and HRC input and output offset available for frequency setting in systems using offset channels
Specifications Subject To Change Without Notice Rev 11-11 ©Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
RF OUTPUT
Frequency Range 54-860MHz
Channels CATV 2-135 / UHF 14-69
Level 60dBmV min
Level Adjustment 20dB
Impedance 75Ω
Frequency Stability
±3 kHz
Audio/Video Ratio -10 to -20dB Adjustable
Output Return Loss -18dB
In Band Spurious -62dB
Out of Band Spurious -65dB
VSB Response -60dB min
C/N (In-Band) >62dBc
C/N (Out-of-Band) >65dBc
IF OUTPUT
Video Level 38dBmV
Video Carrier Frequency 45.75MHz
Audio Carrier Frequency 41.25MHz
Audio Level 22dBmV
Composite Level 35dBmV
Video Stability ±3 kHz
Audio Stability ±2 kHz
Impedance 75Ω
4.5MHZ INPUT
Level 37dBmV
Impedance 75Ω
VIDEO INPUT
Level .7–1.0 V p-p
Frequency Response ±1.0dB max
Impedance 75Ω
Differential Gain
<2% typ
Differential Phase <1° typ
Chrom / Lumin Delay ±8 ns
Hum and Noise -60dB
AUDIO INPUT
Level – Mono 0.5 V p-p – 1 V p-p
Level – Left Audio 0.5 V p-p – 1 V p-p
Level – Right Audio 0.5 V p-p – 1 V p-p
Frequency Response ±1.5dB max
Impedance 600Ω
Preemphasis
75 μs Switchable
MPX/BTSC STEREO
Level 2.2 V p-p
Impedance 500Ω
Frequency Response
1dB, 50 Hz – 14 kHz
Total Harmonic Distortion <0.3%
S/N 75dB
Separation
35dB, 50 Hz – 12 kHz
GENERAL
Power Input 90-260 VAC, 28 W
Operating Temp -10°C to 50°C
Dimensions 19˝ (L) x 12˝ (D) x 1.75˝ (H)
Weight 7.8 lbs.
Connectors RF & Video “F” type
Audio 600Ω Terminal Strip
Ordering Information
A860
Agile Modulator
A860S Agile Stereo Modulator
SPECIFICATIONS
A860
Agile Modulator Integrated BTSC Stereo (option)