Dhdp series, Specifications – Toner Cable DHDP Digital High Definition Processor User Manual
Page 2
Specifications Subject To Change Without Notice
Rev 04-12
©Toner Cable Equipment, Inc.
969 Horsham Road
l
Horsham, Pennsylvania 19044 USA
l
Phone: 215-675-2053 Fax: 215-675-7543
l
DHDP Series
Digital HD Processor 1x 8VSB/QAM ► 1x IF ► 1x 8VSB
Specifications
Connectors
8VSB Input:
“F” Female
IF Output:
“F” Female
Input
Format:
8VSB (ATSC Digital Television A/53E)
Frequency Range:
54-864 MHz (VHF Ch. 2-13, UHF Ch. 14-69)
Operating Level Range:
-20 to +25 dBmV
Installation Input Range:
-15 to +20 dBmV (any undesired Ch. < +25 dBmV)
Max Undesired to
Desired Ch. Ratio:
< +25 dBc
Max Adjacent to
Desired Ch. Ratio:
< +15 dBc
Output
Format:
IF (Intermediate Frequency)
Frequency:
44 MHz center
Output Level (AGC):
+30 dBmV (-20 to +25 dBmV input)
Phase Noise:
-90 dBc/Hz (@ 10 kHz offset)
Down-Converter
Ch. Number:
Front-panel; 2-Digit LED Display
Ch. Selection/Activation:
Front-panel; Up/Down Push Buttons
Up-Converter
Ch. Number & RF Level:
Front-panel; 2-Digit LED Display
+100 Ch. Indicator:
Front-panel; LED, Red
Ch. Selection/Activation:
Front-panel; Up/Down Push-Buttons
RF Level:
Front-panel; Up/Down Push-Buttons
DOWN-CONVERTER
UP-CONVERTER
MONITORING / INDICATORS
Dimensions (W x D x H)
Each Module:
1.15 x 7.5 x 3.5 inches (29 x 191 x 89 mm)
Power Supply:
4.6 x 7.5 x 3.5 inches (106 x 191 x 89 mm)
Rack Chassis:
19.0 x 12.0 x 3.5 inches (483 x 305 x 89 mm)
Power:
MIPS-12C
110 VAC/60 Hz
Power Dissipation:
Down-Converter:
3.2 W
Up-Converter:
5.30 W
Weight
Each Module:
0.8 lbs (0.36 kg)
Fully Loaded Chassis:
20 lbs (9 kg)
Operating Temperature:
32 to 122 °F (0 to 50 °C)
Storage Temperature:
-13 to 158 °F (-25 to 70 °C)
Operating Humidity:
0 to 95% RH @ 35 °C max, non-condensation
Storage Humidity:
0 to 95% RH @ 35 °C max, non-condensation
GENERAL
Connectors
IF Input:
“F” Female
RF Output:
“F” Female
Input
Format:
8 VSB
Frequency:
44 MHz center (IF - Intermediate Frequency)
Input Level:
+30 dBmV
Output
Format:
CATV (Standard, IRC, HRC) and
Broadcast (VHF, UHF)
Frequency:
54-864 MHz
Frequency Tolerance:
±5 kHz
Output Level:
+45 dBmV
Level Adjust Range:
+33 to +47 dBmV
Channel Flatness:
1 dB
Spurious Output:
-60 dB (50 to 1000 MHz)
C/N Ratio (In Channel-Digital):
-60 dB (5.5 MHz bandwidth; +45 dBmV output)
Broadband Noise:
-71 dBc (5.5 MHz BW, +45 dBmV output)
Phase Noise:
-95 dBc (@ 10 kHz offset)
Impedance:
75 Ω
Return Loss:
12 dB